Page 144 - Revit Architecture Basics

ENHANCED DETAILING – WALLS

Wall type parameter

The settings for the type that can be found in Type Properties are properties that are
applicable to all objects of the same type. Changes made here are reflected in the whole
project.
For example, if the wall thickness through the wall's structure is changed, this will transpire
throughout the whole project.
In the dialog box Type properties can be selected to duplicate this type with the button
"Duplicate". Than, name end modify the new Wall type.
Structure:
Opens a new dialog box in which the
actual wall structure is carried out. This
parameter controls the wall thickness.
Wrapping:
Wrapping, when Windows or doors are
installed, or if it is free standing, when
Windows or doors are installed, or if it is
free standing.

Function:
Categorizes the wall.
Used in schemas and to create filters that
will simplify the model's appearance. Wall
Function is also used when you set up a
gbXML export.

The various wall functions that can be selected through Type Selector Function:

Parameter Value Description
Interior Interior walls.

Exterior Exterior walls that are part of the building's geometry. These
walls must act as climate screen on the outside.

Foundation The foundation walls with soil on both sides.
Retaining Walls that support against soil on one side. These walls can be
foundation walls, but it is not necessary.
Soffit Walls that are attached to a ceiling.
Core-Shaft Interior shaft walls

144  NTI