Page 85 - Revit Architecture Basics

Copy / Paste

MAGNIFICATION OF THE STUEPLAN

5. Interior Walls at 1. Sal are modeled after the same principle, which in Project Browser
has to be switched to the appropriate View and Height/Top Constraint has to be set to
the overlying floor/roof.
Location Line is set as needed and Align should be used to get walls to align with the
other.

6. The walls in the area from E5 to G7 can usefully be copied
from ground level to 1. Sal.

This is done by selecting the walls and use
Modify ► Clipboard ► Copy
and then
Modify ► Clipboard ► Paste ► Aligned to Selected
Levels
From the list select "(02) 1. Floor "and there are now created
a copy of the walls on this floor.

Then finish the drawing as shown in the illustration.

 NTI 85