Page 1053 - Foton Workshop Manual - Aumark (BJ1099)

AXLE AND PROPELLER SHAFT - FRONT DIFFERENTIAL ASSEMBLY 34-23

(c). Remove 2 differential bearing spacer.
NOTICE:
It is important to store the differential bearing
spacer and the differential bearing outer ring
together. Store them by left/right separately.

8. Remove the driven gear
(a). Unscrew the retaining bolts of the driven gear.

(b). Remove the driven gear.

34

9. Check the gear side slearance between
half axle gear and planetary gear
(a). Measure the gear side clearance between the half
axle gear and planetary gear with a dial indicator.
Gear side clearance between half axle gear and
planetary gear : 0.05~0.1mm.
Maximum : 0.2mm
If the clearance exceeds the limit, check the
end clearance of the half axle gear. (Refer to
"Chapter 34. Axle & Transmission Shaft - Front
Differential Assembly, Checking & Adjustment")

Page 1053