Page 1058 - Foton Workshop Manual - Aumark (BJ1099)
P. 1058
34-28 AXLE AND PROPELLER SHAFT - FRONT DIFFERENTIAL ASSEMBLY
(c). Tighten the retaining bolts of the driven gear.
Torque : 78~88N•m
NOTICE:
• When removing all retaining bolts, replace new ones.
• When installing bolts, apply two drops of thread
sealant on the thread.
16. Install the differential assembly
(a). Install the differential bearing outer rings.
NOTICE:
Install it by left/right as marked.
(b). Install the differential assembly.
(c). Measure the distance bettween the main
reducer housing and the mounting end of
the differential bearing on the differential
housing.
Page 1058
