Page 1062 - Foton Workshop Manual - Aumark (BJ1099)
P. 1062
34-32 AXLE AND PROPELLER SHAFT - DRIVING GEAR
(d). Measure the driving gear startup tightening
torque with a Torque wrench again.
Startup Torque : 0.49~0.69N·m
NOTICE:
• If the startup Torque is still below the limit,
replace a new driving gear bearing sleeve.
Replace the bearing if necessary. (Refer to
"Chapter 34 Axle & Transmission Shaft - Driving
Gear, Overhaul")
fuwx34054 • After replacement, recheck the startup Torque
until it reaches the required range.
(e). After the startup Torque reaches the
required range, lock the nut lock.
Page 1062
