Page 1061 - Foton Workshop Manual - Aumark (BJ1099)

AXLE AND PROPELLER SHAFT - DRIVING GEAR 34-31
DRIVING GEAR

CHECKING

1. Check the pre-tension of the driving gear bearing
(a). Measure the driving gear startup tightening
torque with a Torque wrench.
Startup Torque : 0.49~0.69N·m
NOTICE:
• Don't unscrew the nut to reduce the startup Torque.
• If the startup Torque is below the limit, take the
following actions.

fuwx34054

(b). Open the nut lock.

fuwx34057

(c). Retighten the nut.
Torque (increase): 5N·m
Torque (max.): 245N•mN·m

34

fuwx34056

Page 1061