Page 2366 - Foton Workshop Manual - Aumark (BJ1099)

62-314 DIAGNOSIS-LIGHTING SYSTEM

(b). Measure the resistance between both the
terminal of the connector C57 on the
OFF T.S Ω
body controller and the grounding with
C57
a multimeter.D15 between terminal and
earthing resistance.
16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 Standard resistance: (check whether there
is a short circuit)

fuwx62 890
Connect the pin by Standard value
multimeter
C57 (D15) - Grounding ＞ 1 MΩ

Is the inspection result normal?
Yes>To step 3.
No >Maintain or replace the harness short circuit to ground between the C57 and the
dipped headlight relay R2.

3. Check the combination switch

(a). Ignition switch:"LOCK".
(b). Disconnect the combination switch connector C16.
(c). Turn the combination switch to the "dipped headlight" gear.

(d). Measure the combination switch connector
C16 with a multimeter.

Connect the pin by Specified value
multimeter

12-19 not existed

Is the inspection result normal?
Yes>To step 4.
No >Replace the combination switch.

4. Detect the short circuit to ground of the combination switch

(a). Ignition switch:LOCK".
(b). Disconnect the combination switch connector C16.
(c). Turn the combination switch to the "dipped headlight" gear.

Page 2366