Page 2369 - Foton Workshop Manual - Aumark (BJ1099)

DIAGNOSIS-LIGHTING SYSTEM 62-317

Symptom description：
Turn the combination switch to the "high beam lamp" gear, one side of the high beam lamp
is not bright while the other side is bright.
△ PROMPT：
Take the left front high beam lamp as an example, detect the right front high beam lamp
with the same method. 62

Diagnosis Procedure

1. Detect the high beam lamp bulb

(a). Ignition switch:"LOCK".
(b). Check whether the connectors of the left and right front combination lamp are loose
or falling off.
(c). Remove the high beam lamp bulbs of the left and right front combination lamp.

(d). Connect the positive and negative
electrode of the bulb to the positive
and negative electrode of the battery
respectively to check if the bulb will light
up.

Is the result normal?
Yes>To step 2.
No >Replace the bulb.

2. Check the harness disconnection

(a). Ignition switch:"OFF".
(b). Disconnect the left front combination lamp connector A28.

Page 2369