Page 2370 - Foton Workshop Manual - Aumark (BJ1099)
P. 2370
62-318 DIAGNOSIS-LIGHTING SYSTEM
(c). Turn the combination switch to the "high
beam lamp"gear, and measure the voltage
between No. 1 terminal of the left front
combination lamp connector A28 and the
grounding with a multimeter.
Standard resistance: (check whether there
is an open circuit)
Connect the pin by Standard value
multimeter
A28(1) - Grounding Battery volt
Is the inspection result normal?
Yes>Find the causes from other symptoms.
No >Repair the harness disconnection between the left front combination lamp connector
A28 and the high beam lamp fuse F27.
Page 2370
