Page 16 - Foton Workshop Manual - Tunland (AT)

01-10 INTRODUCTION - GENERAL SERVICE GUIDELINE

01
Shape (Example) Removal & Installation

remove
install

fpwx010008

(h) Removal & Installation of Vacuum Hose

• When removing and installing vacuum
hose, grab the end of the hose, instead
of the middle.

• When disconnecting a vacuum hose
connector, label it to faciliate the
identification upon connection.
• After removal and installation, check
carefully whether the vacuum hose is
correctly connected.
• When using vacuum pressure gauge, if
the connector is too large, don't directly
connect it to a vacuum hose. Use a
specialized adapater instead. If the vacuum
hose is expanded, leakage may occur.

Page 16