Page 19 - Foton Workshop Manual - Tunland (AT)

INTRODUCTION - GENERAL SERVICE GUIDELINE 01-13

(c) Horn Button Assembly (with Air Bag) 01
• When storing the horn button
assembly, ensure it faces up and don't
place anything on the horn button.
• Don't measure the resistance of the air
bag trigger unit, or the air bag may
suddenly explode and cause danger.
• Don't apply any grease or cleaner onto
the horn button.
• Store the horn button assembly in a
place with the ambient temperature
lower than 93 ℃, moderate humidity
and free of electromagnetic
ftwx011003
intervention.
• Before welding, disconnect the air bag
ECU connector.
• Before disposing the prior horn button
assembly, explode the air bag with
specialized tools in a safe location free
of electromagnetic intervention. (Refer
to “Chapter 62. Supplemental
restraint system - horn button
assembly, disposal”)

3 . Electric Control
(a) Connect & Disconnect Negative Battery Cable
• Before any electric service, disconnect
the negative battery cable to prevent
any incident due to short circuit.
• When disconnecting and connecting
the battery cable, turn off the ignition
and lighting switch and complete
unscrew the cable retaining nuts,
without bending or movement.
• Once the negative battery cable is
disconnected, the clock and radio
records will be reset. So before
repairing, record all necessary data.

Page 19