Page 1219 - Workshop Manual - Tunland (2017)

ENGINE CONTROL SYSTEM - ECT SENSOR 11-31

OVERHAUL 11

1 . Switch off the ignition.
2 . Open the engine hood.
3 . Disconnect battery negative cable. (Refer to "Chapter 20 Starting and Charging
- battery, replacement ")
4 . Drain the engine coolant. (Refer to "Chapter 05 Vehicle Maintenance - Replace
Coolant, replacement")
5 . Remove engine accessory belt. (Refer to "Chapter 15 Engine Mechanical System
- Replace Coolant, overhaul")

6 . Screw out the fixing bolts, take out the
engine belt idler.

7 . Disconnect the ECT senor connector.

8 . Remove the ect senor.
CAUTION

• Clean the mounting surface after
removing.