Page 1870 - Workshop Manual - Tunland (2017)

41-56 TRANSMISSION（JC538） - SECOND SHAFT ASSEMBLY

(b) Install the fifth gear synchronizer assembly.

18 . Install the fifth gear assembly.
(a) Install the fifth gear needle bearing.

CAUTION

• When installed in the gear, the needle
bearing shall be no higher than the gear
end, or check the installation position or
replace the bearing.
• When installing the needle bearing, shake
it and check for missing needle. Replace
it in case of any damage.
• During installation, apply some lubricant
to the needle bearing, to avoid wear
caused by dry friction.

(b) Install the fifth gear.

41