Page 1868 - Workshop Manual - Tunland (2017)

41-54 TRANSMISSION（JC538） - SECOND SHAFT ASSEMBLY

15 . Install the third/fourth gear synchronizer
assembly.
(a) Install the third gear synchronizer ring.

(b) Install the synchronizer gear sleeve, gear hub
and sliding block.

(c) Install the third/fourth gear synchronizer
assembly from the second shaft.

41

(d) Install the circlip with circlip pliers.
CAUTION

• Before installation, check for distortion of
the circlip and replace it if needed.
• Select the right circlip so that the radial
clearance of the synchronizer gear base
meets the standard.