Page 1867 - Workshop Manual - Tunland (2017)

TRANSMISSION（JC538） - SECOND SHAFT ASSEMBLY 41-53

(c) Install the second/third gear washer and
washer ring module.

14 . Install the third gear module.
(a) Install the third gear needle bearing.
CAUTION

• When installed in the gear, the needle
bearing shall be no higher than the gear
end, or check the installation position or
replace the bearing.
• When installing the needle bearing, shake
it and check for missing needle. Replace
it in case of any damage.
• During installation, apply some lubricant
to the needle bearing, to avoid wear
caused by dry friction.

(b) Install the third gear.
41