Page 63 - SMM2 eBOOK

J.26 Special features

Special features composed of one or more stones shall each be enumerated separately stating
the nature and design of the feature, the total volume of stone required and the dimensions of
the exposed faces.

J.27 Steps, winders and landings

1. Steps (except winders) shall be given in metres stating the size and the number of steps.
Spandril steps (i.e steps with sloping soffits) shall be so described. Fair ends, returned
ends, rounded ends, stooled ends, wall-holds and the like shall be deemed to be included
with the members on which they occur.

2. Winders and landings shall each be enumerated separately stating the size. Landings of
irregular shape shall be so described. Fair ends, stooled ends, wall-holds, fair edges,
nosings, rebates, grooves and the like shall be deemed to be included with the members
which they occur.

J.28 Handrails, cappings and kerbs

l Handrails, cappings and kerbs shall each be given separately in metres stating the size
and profile. Stopped ends, returned ends, mitres, stoolings, wall-holds and the like shall
be deemed to be included with the item.

2. Scrolled-ends, angle-blocks, ramp-blocks, wreath blocks and the like shall each be
enumerated separately stating the size and profile. _

J.29 Balustrade panels

Balustrade panels and the like shall be enumerated stating the size. Those of irregular shape
and those worked both sides shall be so described. Fair edges, shaped edges, preforations,
sinkings and the like shall be given in the description.

J.30 Balusters and newels

Balusters, halfbalusters, newels and newel-caps shall each be enumerated separately stating
the size and profile.

J.31 Cover-stones and corbel-courses

Cover-stones, corbels-courses and the like shall be given separately in metres stating the size
and profile. Fair edges shall be given in the description. Fair ends shall be deemed to be
included with the items.

J.32 Templates, bases and hearths

Templates, bases, thresholds, hearths and the like shall each be enumerated separately stating
the size and profile. Fair edges shall be given in the description stating the number.

J.33 Shelves, divisions, table-tops and seats

1. Shelves, divisions, table-tops, work-tops, countertops, seats and the like over 300mm
wide shall each be given separately in square metres stating the thickness. Those not
exceeding 300mm wide shall be given in metres stating the thickness and the width.
Membens of irregular shape and cun/ed members shall each be enumerated separately
stating the thickness and the size and profile.

60