Page 5 - FQ10518.WayneFarms.Dothan.AL.DC25000 w15000 Gal Tank & Option

Page No. 4
Proposal No. Q10518
Date: June 12, 2017

One (1) Set of Pump Controls Including:

1. Starter with NEMA Type 1 enclosure mounted on heater.
2. Selector switch, mounted on the control panel.
3. Starter coil and selector switch are prewired.
4. Pressure gauge.
5. Check valve.

One (1) Hot Water Transfer Assembly Including:

1. Manual throttling valve. (Set at average rate).
2. High pumping rate water valve. (Solenoid operated).
2.1 Anti-hammer diaphragm seat.

One (1) Water Level Control Sensor Assembly Including:

1. Five (5) level sensing probes.
2. One (1) set of gauge cocks with plastic sight glass.
3. Water wall level sensor.

One (1) High Capacity Centrifugal Cold Water Booster Type Water Pump, capable of
nominally pumping 625 GPM at 70 ft. water T.D.H. and including:

1. Cast iron case.
2. Bronze fitted with mechanical seal.
3. Built together type configuration.
4. Totally enclosed fan cooled electric motor, 30 Hp., 3,500 RPM.

One (1) Set of Pump Controls, Including:

1. Starter with NEMA Type 1 enclosure mounted on heater.
2. Selector switch, mounted on the control panel.
3. Starter coil and selector switch are prewired.
4. Pressure gauge.
5. Check valve.

One (1) Water Flow Rate Assembly Including:

1. One (1) pressure gauge. (Setting flow rate).
2. One (1) pressure actuated switch. (Confirm flow and initiate firing).

One (1) Water Make-Up Valve Including:

1. Average rate solenoid operated valve.
1.1 Anti-hammer diaphragm seat.