Page 9 - FQ10518.WayneFarms.Dothan.AL.DC25000 w15000 Gal Tank & Option
P. 9

Page No. 8
                                                                                Proposal No. Q10518
                                                                                Date:  June 12, 2017


               One (1)      High Capacity Centrifugal Dedicated Recirculation Type Water Pump, capable of
                            nominally pumping 625 GPM at 110 ft. water T.D.H. and including:

                            1.      Cast iron case.
                            2.      Bronze fitted with mechanical seal.
                            3.      Built together type configuration.
                            4.      Totally enclosed fan cooled electric motor, 30 Hp., 3,500 GPM.

               One (1)      Set of Pump Controls, Including:

                            1.      Starter with NEMA Type 1 enclosure mounted on heater.
                            2.      Selector switch, mounted on the control panel.
                            3.      Starter coil and selector switch are prewired.
                            4.      Pressure gauge.
                            5.      Check valve.


               We are pleased to quote the following Prepiped Valve and Pump Package Options that will
               substantially reduce your set-up and installation time.


               DCWH Control Valve Package, Including:

                              1.     Stainless steel corrosion resistant piping, flanges and fittings.

                              2.     Manual  isolation  and  bypass  valves  around  automatic  make-up  and
                                     recirculation valves.

                              3.     All manual and automatic valves are prepiped as one assembly for easy
                                     installation.

               DCWH Single Transfer Pump Package, Including:

                              1.     Fabricated steel primed base.

                              2.     Stainless steel corrosion resistant piping, flanges and fittings.

                              3.     Manual  isolation  and  bypass  valves  around  the  automatic  high  rate
                                     transfer valve.

                              4.     Gauges, controls, and valves are assembled to the piping and mounted
                                     together with the pumps on the base.
   4   5   6   7   8   9   10   11   12   13   14