Page 5 - FQ10538-R2.IconReadyMixLtd.Canada.DC5600 wOption

Page No. 4
Proposal No. Q10538-R2
Date: September 12, 2017

One (1) Set of Pump Controls Including:

1. Starter with NEMA Type 1 enclosure and overloads mounted on heater.
2. Selector switch, mounted on the panel.
3. Starter coil and selector switch are prewired.
4. Pressure gauge.
5. Check valve.

One (1) Hot Water Transfer Assembly Including:

1. Manual throttling valve. (Set at average rate).
2. High pumping rate water valve. (Solenoid operated).
2.1 Anti-hammer diaphragm seat.

One (1) Water Level Control Sensor Assembly Including:

1. Five (5) level sensing probes.
2. One (1) set of gauge cocks with plastic sight glass.
3. Water wall level sensor.

One (1) Water Flow Rate Assembly Including:

1. One (1) pressure gauge. (Setting flow rate).
2. One (1) pressure actuated switch. (Confirm flow and initiate firing).

One (1) Water Make-Up Valve Including:

1. Average rate solenoid operated valve.
1.1 Anti-hammer diaphragm seat.

One (1) Outer Wall Temperature Sensor.

One (1) Water Recirculation Assembly Including:

1. Temperature actuated switch – electronic signaling type. (Remotely
mounted in existing hot water tank.
2. Recirculation water valve – solenoid operated.
2.1 Anti-hammer diaphragm seat.

One (1) Differential Pressure Transmitter:

1. Level sensing mounted in remote existing vented hot water tank.