Page 277 - Villas at Savona Close-out Manual

INSULPRO PAINTS
11-19-15

3. Second coat Application: Apply Ultra Kote in a Vertical Horizontal pattern
To a total dry mils thickness of 8 to 10 dry mils. No backrolling necessary.

9.0 General Warranty Information

1. Proper preparation and application by a Insul-Pro Paints Certified
Applicator will assure quality control and a warrantable coating
Warranted against water penetration through the paint film.

Part 1 – General

Work Included

A. The work includes, but is not limited to, furnishings of materials and equipment
and completion of painting and certified applicator finishing of all exterior
surfaces including:

1. Stucco: Main buildings, Clubhouse. New stucco at garage headers and
second story window trim.

2. Wood: Wood trim, front doors, Utility doors.

3. Metal: Galvanized Gutters and Downspouts, Flashing, Decorative Chimney
Caps, Scuppers, Vents, Gas Meters, wrought iron railings, garage doors.

4. Thoroughly examine specifications, site of work and conditions under which
work will be performed before submitting a proposal. Surfaces which cannot
be prepared or painted as specified shall be immediately brought to the
attention of the Owner’s representative in writing.

5. Starting of work without such notification will be will be considered
acceptance by the Contractor of surfaces involved.

6. The Contractor shall replace unsatisfactory work caused by improper or
defective surfaces, as directed by the Owner’s representative at no additional
cost.

B. WORK NOT INCLUDED IN BASE BID

Page 11 of 15