Page 6 - Exlar - Hazardous location SLM/SLG class 1 division 2

Hazardous Location SLG075 and SLG090 Class I Division 2

SLG075 Class I Div 2 Option

3.45 6.97
0.1969 88 177 1.375
Ø 0.1957 34.9
[5mm h9]
2X
1/2 NPT
5.28
134 6.80
1.18
30 173
0.704 0.86
17.9 22
3.05
77
0.6302
Ø 0.6298
[16mm j6]
4XØ.257 6.5 0.11
3
EQUALLY SPACED 2.5587 0.45
ON B.C. 12
Ø3.74B.C. Ø 2.5580 DIM "A"
95 [65 mm g6]
1 Stack Stator 2 Stack Stator 3 Stack Stator
SLG075 1 Stack Stator 2 Stack Stator 3 Stack Stator
with Brake with Brake with Brake
6.53 7.53 8.53 7.81 8.81 9.81
Dim A in. (mm)
(166) (192) (217) (198) (224) (249)
Face plate edge is not intended for alignment of shaft (use pilot)

SLG090 Class I Div 2 Option

3.45
88
.236 6.97
6 177 1.375
34.9
.627
15.9 2 X
1/2 NPT
.118
3
1.417
36 6.78
.136 172
3.4
.96
3.540 24.3
90 .8665
.8659
[22mm j6]
3.1492
3.1485 1.88
4 X [80mm g6] 48 Dim "A"
.257[6.5] 3.937 B.C. Rear View
Equally Spaced 100
on B.C.
SLG090 Dim. 1 Stack Stator 2 Stack Stator 3 Stack Stator 1 Stack Stator 2 Stack Stator 3 Stack Stator
in. (mm) with Brake with Brake with Brake
A 7.76 8.76 9.96 9.07 10.07 11.07
1 Stage Gearhead (197) (223) (248) (230) (256) (281)
A 9.03 10.03 11.03 10.34 11.34 12.34
2 Stage Gearhead (229) (255) (280) (263) (288) (313)
CID2, SLM & SLG Seri es
Face plate edge is not intended for alignment of shaft (use pilot)
Applications with >20A rms will require the larger terminal box.
Drawings subject to change. Consult Exlar for certified drawings.

952.500.6200 | www.exlar.com 159