Page 176 - Schmalz - Vacuum Components

EN_Sauggreifer.book Seite 176 Donnerstag, 25. Februar 2016 5:25 17
PA01019111_inh_EN.pdf
Suction Cups for Handling Sheet Metal
Bell-Shaped Suction Cups SAOG (Oval)
PA01019111_inh_EN.pdf Suction area (LxW) from 60 x 20 mm to 95 x 40 mm PA01019111_inh_EN.pdf

container
Designation Code Bell-Shaped Suction Cups SAOG (Oval)
Schmalz - The Company container Abbreviated designation Suction area LxW Material and Connection thread

Example SAOG 60x20 NBR-45 RA: in mm Shore hardness RA
NBR-45
SAOG
60x20
Vacuum Knowledge SAOG 60x20 NBR-45 G1/4-AG (AG = male (M))
G1/4-IG
(IG = female (F))
80x30
95x40 G3/8-AG
G3/8-IG
Vacuum Suction Cups M10-AG rectangular adapter
M14x1.5-AG
RA
container Ordering Data Bell-Shaped Suction Cups SAOG (Oval)
Special Grippers Suction cup SAOG, available in various diameters, is delivered with connection nipple vulcanized to elastomer part.
container
Vacuum Grip- ping Systems container Bell-Shaped Suction Cups SAOG (Oval)

container
Type* Connection
G1/4"-M G1/4"-F G3/8"-M G3/8"-F M10-M M14x1.5-M Rectangular
Mounting Elements SAOG 60x20 NBR-45 10.01.01.11755 10.01.01.11754 10.01.01.11758 10.01.01.11757 10.01.01.11760 10.01.01.11761 adapter
10.01.01.11762
10.01.01.11668
10.01.01.11659
10.01.01.11649
SAOG 80x30 NBR-45
10.01.01.11653
10.01.01.11614
10.01.01.11655
10.01.01.11651
SAOG 95x40 NBR-45 10.01.01.11660 10.01.01.11650 10.01.01.11652 10.01.01.11615 10.01.01.11654 10.01.01.11656 10.01.01.11669
*Additional material specifications at beginning of the section "Vacuum Suction Cups"
Vacuum Generators container Technical Data Bell-Shaped Suction Cups SAOG (Oval)
container Type Suction force Lateral force Lateral force oily Volume Min. curve radius Recom. internal
[mm]
Valve Technology [N]* [N]** surface [N]** [cm³] (convex) hose diameter
d [mm]***
56
4.9
SAOG 60x20 NBR-45 105 35 10 13.2 13 4 4
Switches and Monitoring SAOG 95x40 NBR-45 165 97 68 26.9 25 4
65
45
SAOG 80x30 NBR-45
20
*The specified suction forces are theoretical values at a vacuum of -0.6 bar and with a smooth, dry workpiece surface - they do not include a safety factor
**The specified lateral forces are values measured at a vacuum of -0.6 bar with a dry or oily, smooth, flat workpiece surface. Depending on the workpiece surface and its quality,
the actual values may deviate from these values.
***The recommended hose diameter refers to a hose length of approx. 2 m
Filters and Connections

Services

Contact

Index of Products

176 www.schmalz.com/saog
container

PA01019111_inh_EN.pdf