Page 14 - Alkon - Directional Control Air Valves & Accessories
P. 14
Keeping the world moving and working.
S E R I ES A V A L V ES
SERIES A VALVES Solenoid Controlled /
Pilot Operated
Reliable rapid response is inherent to the
Series A valve’s design concept. The low
friction operation, short spool travel and
low mass spool all represent construction
features that make fast response possible.
Equally important, this fast response is
repeatable. It does not fluctuate when
degree of lubrication, operating pressure or
internal valve back pressure vary.
Model 7900 – Single Horizontal Model 7980 – Double Horizontal
Solenoid / Pilot Operated Solenoid / Pilot Operated Fast, repeatable response translates into
immediate benefits for the machine
designer. Now, machine cycle rates can
be increased to match the valve’s instant
response to control signals.
Horizontal and Vertical
Solenoid Operation
Solenoid/Pilot operators are available in
either horizontal or vertical configurations
to accommodate varying space limitations.
Model 8060 – Single Vertical Model 8065 – Double Vertical The horizontal model is usually used for
Solenoid / Pilot Operated Solenoid / Pilot Operated sub-base and cylinder mounting; the
vertical for manifold mounting since it
Horizontal provides access to the manifold’s side
cylinder ports.
Series A solenoid operators offer a wide
variety of voltages and frequencies; all coils
are continuously rated and continuous cycle
rates up to 300 CPM can be maintained.
OPTIONS:
Vertical • Molded coils
• Locking type manual override
• Two position detent
(adds 5/8” to overall length)
• 1/4 NPT threaded pilot exhaust
adapter
• External pilot supply
NOTE: Three position open or closed
center valves are available as special
assemblies. Consult factory.
14 www.alkoncorp.com