Page 30 - Paker - Medium Duty Hydraulic Cylinders

Catalog HY08-1130-4/NA Medium Duty Hydraulic Cylinders
Mounting Information – 1.00" to 5.00" Bore Series 3L

Cap Fixed Clevis Mounting ZC + STROKE
Style BB XC + STROKE
(NFPA Style MP1) Y P + STROKE
W LB + STROKE
EE
ØCD 1
PIVOT
PIN
ØMM 2 4 E
MR SQ.
LR

K 3
F G J L
CW CW
CB
Note: Tie rod nuts are supplied on both ends, as shown, on 1.00, 4.00 and
Table 1 – Dimensional and Mounting Data 5.00 bores. Tie rods are threaded into the cap on all other bore sizes.
Bore CB CD Ø CW E EE F G J K L LR MR Add Stroke
Ø +.000 1 2
-.002 NPTF SAE LB P
1.00 3 7 0.441 7 7 4 1/4 5 6 0.38 1.50 1.00 0.19 0.50 0.50 0.50 3.88 2.13
1.50 0.75 0.501 0.50 2.00 3/8 5 6 6 0.38 1.50 1.00 0.25 0.75 0.75 0.63 4.00 2.25
2.00 0.75 0.501 0.50 2.50 3/8 5 6 0.38 1.50 1.00 0.31 0.75 0.75 0.63 4.00 2.25
2.50 0.75 0.501 0.50 3.00 3/8 5 6 0.38 1.50 1.00 0.31 0.75 0.75 0.63 4.13 2.38
3.25 1.25 0.751 0.63 3.75 1/2 10 0.63 1.75 1.25 0.38 1.25 1.00 0.94 4.88 2.63
4.00 1.25 0.751 0.63 4.50 1/2 10 0.63 1.75 1.25 0.38 1.25 1.00 0.94 4.88 2.63
5.00 1.25 0.751 0.63 5.50 1/2 10 0.63 1.75 1.25 0.44 1.25 1.00 0.94 5.13 2.88

Table 2 – Dimensional and Mounting Data

Bore Rod MM W Y Add Stroke Bore Rod MM W Y Add Stroke
Ø No. Rod Ø No. Rod
Ø XC ZC Ø XC ZC
1 (Std.) 0.500 0.63 1.94 5.00 5.44 1 (Std.) 1.375 1.00 2.69 7.13 7.88
1.00
2 0.625 0.63 1.94 5.00 5.44 2 2.500 1.63 3.31 7.75 8.50
1 (Std.) 0.625 0.63 1.94 5.38 5.88 4.00 3 1.750 1.25 2.94 7.38 8.13
1.50
2 1.000 1.00 2.31 5.75 6.25 4 2.000 1.38 3.06 7.50 8.25
1 (Std.) 0.625 0.63 1.94 5.38 5.88 7 1.000 0.75 2.44 6.88 7.63
2.00 2 1.375 1.25 2.56 6.00 6.50 1 (Std.) 1.750 1.25 2.94 7.63 8.38
3 1.000 1.00 2.31 5.75 6.25 2 3.500 1.63 3.31 8.00 8.75
1 (Std.) 1.000 1.00 2.31 5.88 6.38 3 2.000 1.38 3.06 7.75 8.50
2 1.750 1.50 2.81 6.38 6.88 5.00 4 2.500 1.63 3.31 8.00 8.75
2.50
3 1.375 1.25 2.56 6.13 6.63 5 3.000 1.63 3.31 8.00 8.75
7 0.625 0.63 1.94 5.50 6.00 7 1.000 0.75 2.44 7.13 7.88
1 (Std.) 1.000 0.75 2.44 6.88 7.63 8 1.375 1.00 2.69 7.38 8.13
2 2.000 1.38 3.06 7.50 8.25
3.25
3 1.375 1.00 2.69 7.13 7.88
4 1.750 1.25 2.94 7.38 8.13
1 NPTF ports will be furnished as standard unless SAE straight 6 Straight thread ports on the cap end of 1.50" bore require an adapter
thread ports are specified. fitting. An adapter fitting is also required on the head end of 1.50"
2 SAE straight thread ports are indicated by port number. bore with straight thread ports and Code 2 rod. Adapters are
3 Cushion adjusting needle valve for 1.00" bore projects beyond sides furnished as standard.
of head and cap. 7 In 1.00" bore size only, a single fixed eye mounting lug, .44" thick
4 1.00" bore 3L heads are rectangular — see 1.00" bore mounting is used. Dimension CD (.441") is hole diameter. Pin not furnished.
information page.
5 On 1.00", 1.50", 2.00" and 2.50" bore sizes, the head end (only) pipe
thread is not full depth on cylinders with No. 2 rods. Minimum of 3
full threads available.

20 Parker Hannifin Corporation
Industrial Cylinder Division
www.parker.com/cylinder Des Plaines, Illinois