Page 126 - 4147 - Fugro Catalogue Edited 19.05.2017

PRODUCT DATA SHEET ROV INTERVENTION TOOLING

FUGRO-impROV

10K PSI INJECTION SKID

The 10k psi Injection Skid is a hydraulically powered
sub-sea tool. The skid is capable of producing up to
10,000PSI / 690bar of output pressure. It has the facility
to measure output flow of the system, and is able to
switch between two output ports.
Water based fluids (such as glycol) are supplied to the unit from an
independent source reservoir which are then pressurised using a dual
media hydraulic intensifier. The high pressure water passes through a
flowmeter which has an RS232 output that can be connected to any
computer installed with software to allow the display and recording of the Skid Top View
output flow from the pump unit.
A pilot controlled directional control valve (DCV) allows either the A or B
output port to be selected. This 10k psi Injection Skid is designed for use
on work class ROV’s. It requires a hydraulic supply of 40lpm at a maximum
pressure of 200 bar (2900 psi).
A separate valve ROV operable valve panel can be connected to the
skid unit to enable pressure to be locked into the output lines of both A
and B ports. The de-mountable pressure gauges on the skid unit can be
connected to this valve panel to monitor pressure during operations such
as seal testing on equipment.
The ROV operable valve panel can be interchanged with an optional 10k Skid Software
seawater intake panel.

Fugro-impROV Subsea Tooling Catalogue