Page 35 - 4147 - Fugro Catalogue Edited 19.05.2017

PRODUCT DATA SHEET ROV INTERVENTION TOOLING

HIGH FLOW VALVE PACK

Technical Specifications
General

Size (approx.) 300 mm x 230 mm x 318 mm (l x w x h)
Weight in Air (approx.) 40 kg, (88 lb)
Weight in Water (approx.) 28 kg, (62 lb)
Design Life 10 years (with regular maintenance)
Design Depth 3000 MSW (>3000 MSW options available)
Tool Supply (from ROV)

Maximum Design Supply Pressure 210 bar, (3045 psi)
Maximum Design Supply Flow Rate 40 to 200 l/m, (11 to 53 g/m) depending on flow required from VP
Operating Fluid ISO 22 / 32
Electrical Supply 4 A @ 24 VDC / 110 VAC (Optional)
Tool Output / Interfaces

Bi-directional fully proportional valve stations 4 of 0 to 90 l/m (nominal) @ 10 to 210 bar
Hydraulic Interface G ¼”, G ¾”, G1” (BSPP)
Electrical Interface Subconn MCBH8F
Signal Interface RS485 Communications
Sensor Inputs Spare Analogue / Digital channels
Diagnostic Sensors Inlet pressure monitoring, Valve station pressure monitoring,
LIM monitoring, water detection sensors, system voltage, system current,
individual valve current monitoring, coil dive fault / status.
Mechanical Mounting 6 of M12 x 1.75 x 20 deep mounting holes

Key Features
Provides accurate pressure and flow control at up to 90 l/m and 210 bar
Compact, lightweight housing, 3000m deep water rated
Can be used with any Fugro Independent Valve Pack System
Fully proportional flow and pressure control on all NG6 valve function
6082-T6 Aluminium alloy anodised to BS5599 / All external fittings 316 stainless steel
Two water detectors circuit fitted

Fugro-impROV Subsea Tooling Catalogue