Page 53 - June

PROFESSIONAL ADVICE

To restart the compressor after the thermal protection has
tripped, press the reset button "//" and then the start button "I".
The start-up will take place 10 seconds after the power is

supplied to the control board. Checking the functioning of the
central control unit compressor before starting work by
pressing the "//" button with a shutter speed pressed state
more 3 seconds. All indicators should turn on.

designation description

The button cancels the display of the stored alarm. If the button is pressed for
more than 3 seconds, the central control unit is checked. All indicators should
turn on.

The button turns on the compressor. Turning on occurs 10 seconds after
power is applied to the board.

The button starts the shutdown phase of the compressor. The compressor runs
idle for 30 seconds and then stops.

Stanochniy park 53