Page 98 - Bernardon Proposal for Design Services Revised

4 revised Sept. 12, 2022

PROJECT PHASE DELIVERABLES
DCI+MacINTOSH ’s services at each phase are described in the below section.

Schematic Design (SD): DCI+MacINTOSH attends the kick-off meeting; shares
applicable codes and standards with the team; confirms the project owner’s requirements
for the structural system; assists in the selection of structural systems for both gravity and
lateral designs; provides structural criteria to the geotechnical engineer as requested;
prepares studies of alternate structural systems; and prepares schematic-level framing
plans with sufficient detail to aid in a structural cost estimate by the contractor/estimator.
DCI+MacINTOSH ’s SD documentation is prepared as redlines to architectural PDF files,
in lieu of REVIT modeling. These services will be provided for each of the proposed
buildings. DCI+MacINTOSH will inform the architect/client if additional information is
required to proceed with the next phase of design.

Design Development (DD): DCI+MacINTOSH meets with the architect and the owner’s
representative to discuss proposed structural systems and foundations. The engineering
team attends design and coordination meetings; prepares DD-level analysis of the gravity
and lateral systems; prepares DD-level drawings for the Primary Structural Frame;
coordinates with the architect to prepare floor plans; and develops preliminary structural
specifications. DCI+MacINTOSH ’s DD documents are prepared with REVIT and
provided in electronic PDF format. DCI+MacINTOSH will inform the architect/client if
additional information is required to proceed to the next phase of design.

Construction Documents (CD): DCI+MacINTOSH attends design and coordination
meetings; prepares structural drawings and calculations; provides structural
specifications; provides requirements for special inspections required by code during
construction; and if requested, reviews the CD cost estimate prepared by others.
DCI+MacINTOSH ’s CD documents are prepared with REVIT and provided in PDF format
for submittals to the permitting agency.

Permitting: Respond to plan review comments and provides updated documents as
necessary to assist in obtaining the building permit.

Bidding & Negotiation: DCI+MacINTOSH responds to bidder questions, reviews
comments, and provides clarifications and updated documents as necessary.

Construction Administration: DCI+MacINTOSH will respond to RFIs and review
submittals, field request changes, and special inspection reports. DCI+MacINTOSH will
visit the site and perform structural observations as indicated above in the Basic Services
section.

Washington | Oregon | California | Texas | Alaska | Colorado | Montana | Delaware | Pennsylvania