Page 99 - Bernardon Proposal for Design Services Revised

P. 99

3
5 revised Sept. 12, 2022

STRUCTURAL DOCUMENT DEVELOPMENT
We understand REVIT will be utilized to produce the Construction Documents for this
project. The digital files are not intended for use for construction dimensioning, such as
shop drawings, layouts, etc., but the files can be made available to the contractor for
informational purposes, provided such use is at the contractor’s own risk and is subject to
the execution of DCI+MacINTOSH ’s standard digital media agreement. We have made
the assumptions outlined in the attached document “Building Information Modeling (BIM)
– Structural Design Scope of Services“ regarding the development of the structural
model.

ASSUMPTIONS AND QUALIFICATIONS OF PROPOSAL
1. DCI+MacINTOSH assumes a geotechnical study will be made available before 50 1
design commences. The report should include a description of soil types, condition, 350+ 16
stability, bearing capacity, seismic site class, and groundwater conditions. The report states licensed in Motto:
should also provide recommendations for structural design criteria and subgrade employees

preparation. We are assuming the site is suitable for conventional spread footings. nationwide oﬃces (+ multiple Canadian Service, Innovation,
2. The Primary Structural Frame will be designed to support typical mechanical, provinces) Value
electrical, plumbing, fire protection and building maintenance equipment. Delay or
late selection of these systems may require additional fees if structural design
modifications are required. Design of lateral bracing or anchorage for any of the MEP
or fire protection systems are not included but may be provided as an Additional
Service.
3. Our Construction Administration fees do not cover the correction of construction
errors or design changes made after the start of construction.
4. We have assumed 12 months of construction time to complete the Project DCI+MacINTOSH has been providing client-focused structural and civil engineering services for 33 years. Our oﬃce

Development Phase and approximately 8-10 months to complete the Primary locations are spread up and down the West Coast, including Washington, Oregon, California and Alaska; the Mountain
Structural Frame. Excessive construction delay may require additional fees to cover States of Colorado and Montana; the East Coast, and Texas. These sixteen oﬃces employ over 350 engineers and

our increased management time. The permit drawings are planned for completion in

Q3 2023. technical support staﬀ. We are licensed in all 50 states as well as many Canadian provinces. In fact, DCI+MacINTOSH’s
completed project portfolio extends across North and South America as well as into Asia.
Service: Comprehensive understanding of project goals and project challenges, not just from a structural
standpoint, helps distinguish the level of service DCI+MacINTOSH strives to provide. This level of comprehensive
knowledge and understanding allows us to be a proactive part of the design and construction team.

Innovation: DCI+MacINTOSH’s depth of experience, combined with our breadth of company-wide technical

knowledge, allows us to provide more eﬃcient and creative structural solutions. We are continuously oﬀering our

clients opportunities to incorporate new products or strategies in order to add value to their project.

Value: DCI+MacINTOSH recognizes that the designs we provide can positively aﬀect the construction cost, the
project schedule, and the long term value of the project. We strive to establish good communication with the design
team and to facilitate dialogue that will help the project team meet or exceed the goals necessary to make the
project successful.

Why DCI+MacINTOSH?

Throughout our geographic growth, DCI+MacINTOSH has focused on making all of our oﬃces highly connected.

This connection includes sharing intellectual resources, physical resources, and workload. As a result of this close

94 95 96 97 98 99 100 101 102 103 104