Page 25 - QR CIMAR LASER SCREED

ITEM TO BRING TO A JOB SITE

1) Laser Transmitter 2) Tripod/Column Clamp 3) Gas
4) Tachometer 5) Scrub Brush for Washing 6) General tool set
7) Spare tire 8) Hard hats 9) Screed Grade rod
10) Batteries for Laser 11) Rubber Boots 12) safety Glasses
13) Counter Weight 14) Ear Plugs 15) Spare Parts Kit

PRESTART MACHINE CHECK AND SAFETY CHECK

Before starting the machine, perform the following checks:

1.) Check the engine oil level.
2.) Check fuel level.
3.) Check the air filter.
4.) Check the hydraulic oil level.
5.) Check the battery condition.
6.) Check the condition of the hydraulic cooler fins. If the fins become oily, dirt will stick to them and

eventually block air flow.
7.) Check for any obstructions at the engine cooling air intake and discharge.
8.) Check hydraulic pump and associated hoses and fittings for leaks.
9.) Check hydraulic oil filter and associated hoses and fittings for leaks.
10.) Check tire condition and check tire pressure.
11.) Check fuses and circuit breakers.
12.) Ensure all guards and safety decals are in place.
13.) Set tie Rod to a 3 degree attack angle.
14.) Level machine with Head lift or Auto machine level.
15.) Verify Laser/Electronics working properly.
16.) Check vibrator speed.

23