Page 20 - QR CIMAR POWER TROWEL CPT-36

CPT-36/F220/TEESIN/MAN/01/15 Compile by CJ

size/type for pulley assy and clutch and
3. Clutch is struck.
4. Throttle control replace them if

system does not necessary.
work properly.
4. 4. Check the
1. One set of adjusting
bolts not properly connection between
adjusted, and all
four blades are not the Throttle or cable
on the same surface.
wire. Readjust the
2. The blade is warped.
1. Clutch is stuck. connections or
2. The pins of the
replace the system if
pulley, clutch, or
blades may be necessary.
damaged of missing.
Blades wear unevenly. 1. Readjust the bolts to

Blade assembly does not ensure all four
work when engine is
started. blades are on the

four blades.

2. Replace the blade.

1. Check clutch assy
and replace clutch if
necessary.

2. 2. Replace pins of
pulley, clutch, or
blades.

Note:
If engine fault is detected on the machine, please refer to the respective engines model
manual for troubleshooting.

For technical questions, please call +65 – 66431213 18
For Products Enquiry, please call +65 - 67581211