Page 18 - QR CIMAR POWER TROWEL CPT-36
P. 18
CPT-36/F220/TEESIN/MAN/01/15 Compile by CJ
7. Troubleshooting
Problem Possible Cause Possible Solution
Machine will not start 1. Fuel tank empty. 1. Fill fuel tank with
unleaded gasoline.
Start but no high speed or 2. Low or no oil. 2. Fill crankcase with
won't slow down proper amount/type
3. Clutch is stuck. of oil.
3. Check the clutch
4. The brake is in its and replace it if
necessary.
OFF position. 4. Set the brake to its
ON position.
5. Throttle fully open 5. Close throttle fully.
6. Replace hand lever
6. Hand lever wire wire.
7. Change fuel
broken. 8. Replace fuel filter
9. Replace fuel line
7. Dirty fuel. 10. Replace fuel line
11. Turn on the fuel
8. Fuel filter plugged. supply valve.
12. Refer to engine
9. Fuel line plugged. manual.
10. Hole in fuel line.
11. Fuel supply valve
turned off.
12. Other engine
problems. (Refer to
engine manual)
1. Engine problems 1. Refer to engine
manual.
2. Throttle cable 2. Replace throttle
broken or seized cable.
3. Throttle lever and 3. Reconnect throttle
connectors loose or lever and
out of adjustment connectors.
4. Replace Clutch
4. Clutch shoes worn. shoes worn.
Engine Starts but won't turn 1. Clutch seized. 1. Check the clutch,
trowels at any speed. 2. No weights or replace it if
necessary .
broken clutch.
3. Wrong belt. 2. Replace clutch.
4. Broken or missing 3. Replace correct belt
4. Replace:
key: - Clutch
- Clutch - Pulley
- Pulley
16
For technical questions, please call +65 – 66431213
For Products Enquiry, please call +65 - 67581211
