Page 101 - MRF Training TJ MRF Manual Version 5 22042024 final April 24_Neat

Operating a Dumper

Operative will be externally trained and
competent and have read the RA’s and SSW’s
relevant to the job they are undertaking.

Read and understood the operators handbook.
Staff will wear all the necessary PPE provided
and instructed.

Follow all safety instructions given and not put
themselves at risk.

Ensure that they make eye contact before
entering the danger zone of any machine or
vehicle within the working environment.

Daily Checks
Basic Start Up Procedure

Complete a daily walk around safety inspection of Windows and mirrors must be adjusted and clean
your machine that will include checking fluid at all times. Check your blind spots using 1 m rule
levels before completing a defect sheet-any
defects should be reported to your manager and The reversing camera and bleeper must be and continue to start up procedure
rectified as necessary. operational at all times

Ensure that your seatbelt is Start engine on slow idle for 2 Before starting the engine, ensure the
worn at all times. minutes and allow air pressure to Confirm that all levers and pedals are handbrake is applied and all
build before the hand brake is in neutral
Start Work released and full power is engaged. bystanders are a safe distance away.

Basic Shut Down Procedure

Climb down from
Park machine in Allow the the machine using
Switch off
a safe area Return all engine to idle Engine, remove three points of
Apply the
Lower the
away from tipping body. control levers to for 2 minutes to handbrake keys and lock contact whilst
waste on a firm neutral cool the engine the machine. using the handrails
level surface and turbo. and steps
provided.

Page 100 of 181

Reviewed April 2024