Page 105 - MRF Training TJ MRF Manual Version 5 22042024 final April 24_Neat
P. 105

Operating a Bulldozer

                    Operative  will  be  externally  trained  and
                   competent  and have read the RA’s and
                   SSW’s  relevant  to  the  job  they  are
                   undertaking.

                    Staff  will  wear  all  the  necessary  PPE
                   provided and instructed.

                    Follow all safety instructions given and not
                   put themselves at risk.
                    Ensure  that  they  make  eye  contact
                   before  entering  the  danger  zone  of  any  machine  or  vehicle  within  the  working
                   environment.
            Daily Checks



                                                                       Inspect the blade before use.
                                                                 Ensure that it is fitted correctly prior to start up and all
               Complete a daily walk around safety inspection of your   Windows and mirrors must be adjusted and clean at all   locking pin are fitEnsure you inspect and ensure that
               machine that will include checking fluid levels before   times.  the blade is fitted and not damaged prior to start up   Check your blind spots using 1 m rule and
                completing a defect sheet-any defects should be   The reversing camera and bleeper must be operational   and check all fixing points and pins that they remain   continue to start up procedure
               reported to your manager and rectified as necessary.
                                                 at all times     undamaged and safe. Ensure that the tracks are also
                                                                  checked and idlers lubricated when necessary.ted
                                                                           corectly
            Basic Start Up Procedure





                                                                                       Before starting the engine, ensure the
                Ensure that your seatbelt is                                              handbrake is applied and all
                   worn at all times.   Start engine on slow idle for 2   Confirm that all levers and pedals are   bystanders are a safe distance away.
                                     minutes before full power is engaged.  in neutral  Check that the the blade or ripper are
                     Start Work
                                                                                           in the lowered position


                          Basic Shut Down Procedure








                                                                                                 Climb down from
               Park machine in                            Allow the                              the machine using
                                                                                     Switch off
                 a safe area   Lower blade   Return all   engine to idle   Apply the   Engine, remove   three points of
                              and ripper
                 away from   slowly to the   control levers to   for 2 minutes to   handbrake  keys and lock   contact whilst
               waste on a firm   ground.     neutral    cool the engine             the machine.  using the handrails
                level surface                            and turbo.                                and steps
                                                                                                   provided.








                                                  Page 104 of 181

                                                                                  Reviewed April 2024
   100   101   102   103   104   105   106   107   108   109   110