Page 442 - Workshop Manual - Aumark (BJ1051)

04-298
Diagnosis-Power Windows
9. Checking right front door glass lifter

(a) Use a multimeter to measure resistance
between connector pins 1 and 2 of right
front door glass lifter D004.
Resistance: approx. 11Ω

4 Is check result normal?
Yes > Replace fuse F4 (20A).
No > Replace left front door glass lifter.
10. Checking power circuit of power window
(a) Ignition switch: ON.
(b) Use a multimeter to measure voltage to ground of fuse F4 (20A).
Voltage: battery voltage
Is check result normal?
Yes > Go to step 13.
No > Go to step 11.
11. Checking output supply of power window relay
(a) Use a multimeter to measure voltage to ground of pin 87 of power window relay.
Voltage: battery voltage
Is check result normal?
Yes > Repair line open between pin 87 of power window relay and F4 (20A).
No > Go to step 12.
12. Checking power and ground circuits of power window relay
(a) Ignition switch: OFF.
(b) Take off power window relay.
(c) Ignition switch: ON.
(d) Use a multimeter to measure voltage between pins 86 and 85 and voltage to ground of pin
86 of power window relay R12 respectively.
Voltage: battery voltage
(e) Use a multimeter to measure voltage to ground of pin 30 of power window relay.
Voltage: battery voltage

Page 442