Page 443 - Workshop Manual - Aumark (BJ1051)

04-299
Diagnosis-Power Windows
Are check results normal?
Yes > Replace power window relay.
No > If battery voltage is not available between pins 85 and 86 of power window relay only,
repair line open between pin 86 of the relay and ground.
If battery voltage is not available between pin 85 of power window relay and ground only,
repair the line between IG power relay and pin 85 of power window relay.
If battery voltage is not available between pin 30 of power window relay and ground only,
repair line open between fuse F/L2 (50A) and pin 30 of power window relay.
13. Checking power and ground circuits of left front door control switch

(a) Use a multimeter to measure voltage
between connector pins 3 and 6 and
voltage to ground of pin 3 of left front
door control switch E003 respectively. 4
Voltage: battery voltage

Is check result normal?
Yes > Go to step 14.
No > If battery voltage is not available in either case, repair line open between fuse F4 (20A) and
connector pin 3 of left front door control switch E003.
If battery voltage is not available between connector pins 3 and 6 of left front door control
switch E003 only, repair line open between connector pin 6 of the switch and grounds B208
and B209.
14. Checking control circuit of left front door glass lifter

(a) Use a multimeter to measure voltage
between connector pins 1 and 2 of left
front door glass lifter E004.
(b) Depress left front door control switch
(left front window).
Voltage: battery voltage
(c) Pull up left front door control switch (left
front window).
Voltage: battery voltage

Is check result normal?
Yes > Replace left front door glass lifter.
No > Go to step 15.

Page 443