Page 494 - Workshop Manual - Aumark (BJ1051)
P. 494

04-350
                                                    Diagnosis- combination meter
               Is check result normal?
               Yes >   Repair line open between connector pin 3 of combination meter B032 and connector pin 1
                      of coolant temperature sensor C007.
               No >    Go to step 4.
               4.     Checking for coolant temperature sensor signal circuit short
               (a)    Ignition switch: OFF.
                                                                (b)     Disconnect connector of combination
                                                                        meter B032.








   04


                                                                (c)     Use a multimeter to measure resistance
                                                                        to ground of connector pin 1 of coolant
                                                                        temperature sensor C007.
                                                                        Resistance: >1MΩ










               Is check result normal?
               Yes >   Replace combination meter assembly.
               No >    Repair signal line to ground short between connector pin 1 of coolant temperature sensor
                      C007 and connector pin 3 of combination meter B032.








































                                                                                                         Page 494
   489   490   491   492   493   494   495   496   497   498   499