Page 491 - Workshop Manual - Aumark (BJ1051)
P. 491
04-347
Diagnosis- combination meter
Is check result normal?
Yes > Repair line open between connector pin 2 of combination meter B032 and connector pin 3
of fuel sensor C038.
No > Go to step 4.
4. Checking for fuel sensor signal circuit short
(a) Ignition switch: OFF.
(b) Disconnect connector of combination
meter B032.
04
(c) Use a multimeter to measure resistance
to ground of connector pin 3 of fuel
sensor C038.
Resistance: >1MΩ
Is check result normal?
Yes > Replace combination meter assembly.
No > Repair signal line to ground short between connector pin 3 of fuel sensor C038 and
connector pin 2 of combination meter B032.
Page 491
