Page 26 - MOTOR-SISTEM UBRIZGAVANJA KLANN

Kapitel_6_3-4.fm Seite 270 Montag, 10. April 2017 11:05 11

Engine
Injection System, Mercedes

KL-1383-132 K
KL-1383-132 K
Cleaning Tool Set with Compressed Air
Adaptor, for Injector Nozzle Seat

Applicable to: Mercedes: OM639, OM640, OM642, OM651; PSA: 2.7 HDI engine:
DT17, 3.0 HDI engine: DT20
The special design of the cleaning tool KL-0369-20 A allows the injector nozzle
mounting hole, the nozzle seal seat, and the small aperture leading to the
combustion chamber to be cleaned in a single operation.
Impurities can be prevented from entering the combustion chamber by screwing the
compressed air adaptor KL-1383-118 into the glow plug bore hole and injecting air
into the combustion chamber.
Scope of Delivery: KL-1383-132 K Cleaning Tool Set with Compressed Air Adaptor,
for Injector Nozzle Seat, Mercedes/PSA
Part No. Description Qty
KL-1383-118 Compressed Air Adaptor for M8x1 Glow Plug Bore M8x1 1
KL-0369-20 A Cleaning Tool for Injector Nozzle Seat 1
KL-1383-1329 Plastic Storage Case 1

KL-0369-59
KL-0369-59
Puller for Sealing Ring
Universally suitable for sealing rings with an internal diameter of 4-16mm, e.g.
injector nozzle sealing rings as found in Diesel engines on BMW, Mercedes, PSA
etc.
The KL-0369-59 puller is designed for the professional removal of sealing rings; for
example of those located between the injector nozzle and cylinder head.
To remove the sealing ring, screw the tapered tip of the tool into the ring, then pull it
out with the aid of the slide hammer.
Technical Data:
Slide hammer weight: 0.9kg
6 Length: 385mm
4-16mm
For sealing ring internal Ø:

KL-0369-511 A
KL-0369-511 A
Screw Tap, M7, with Drill Bit
with Spiral Grooves, Mercedes

Applicable to Mercedes OM651 CDI engines.
For re-tapping and cleaning the threaded bore hole in which the injection nozzle holder
is fixed. These are indispensable work steps before installing/re-installing an injector.
Technical Data:
Length: 100mm
Thread: M7

Copyright GEDORE Automotive GmbH, Germany
formerly