Page 27 - MOTOR-SISTEM UBRIZGAVANJA KLANN

Kapitel_6_3-4.fm Seite 271 Montag, 10. April 2017 11:05 11

Injection System, Mercedes / Opel/Vauxhall

KL-0192-23 KL-0192-23
Fuel Return Line Pliers

Ideal for use on Mercedes OM601, OM602, OM603 and VW Audi vehicles where
the injection nozzles are located very deep in the cylinder head.
For removing fuel return lines from injector nozzles on Diesel engines.

KL-0489-10 KL-0489-10

Injector Nozzle Puller
with Slide Hammer, Opel/Vauxhall

Applicable to Opel/Vauxhall Diesel engines, e.g. 2.2.
The injector nozzle puller KL-0489-10 enables the removal of tightly fitting injectors
within just a few minutes.
Technical Data:
Slide Hammer Weight: 0.9kg
Connecting thread (injector nozzle): M17x0.75
Length: 185mm
Scope of Delivery: KL-0489-10 Injector Nozzle Puller with Slide Hammer
Part No. Description Qty
KL-0049-100 Slide Hammer Puller Base Tool 1
KL-0489-1001 Adaptor, M10 to M17x0.75 1

KL-1683-103 KL-1683-103
Cleaning Tool for Injector Nozzle Seat 6

Applicable to Common Rail Diesel engines on Opel/Vauxhall, Fiat, Lancia,
Suzuki 1.3 JTD, 1.3 CDTi, 1.3 JTD, 1.3 DDis / engine: Z13DT, 188A9.000.
In a single machining operation, the specially shaped cleaning tool produces a clean Technical Data:
finish on the injector mounting hole, the nozzle seal seat and the small aperture Drive: T-handle
leading to the combustion chamber. Length: 261mm
Indispensable procedure before re-installing/installing an injection nozzle to avoid Cleaning tool Ø: 7.5/17/17.6mm
leakage between cylinder head and injector nozzle.

KL-0186-51 (German Utility Model) KL-0186-51

Cleaning Tool Set for Injector Nozzle Seat

Suitable for use on the Fiat 2.3 JTD, 2.8 JTD and 3.0 JTD Diesel engines with
conical injector nozzle seat.
The cleaning tool enables the quick and professional cleaning of conical injector
nozzle seats.
Indispensable working step before installing/re-installing an injector nozzle in order
to avoid leakage between cylinder head and injector nozzle.
The spring-loaded centring cone sleeve ensures accurate guidance of the cleaning
tool in the injector nozzle bore, thus enabling the seal seat to be cleaned properly and
without any trouble.
Scope of Delivery: KL-0186-51 Cleaning Tool Set for Injector Nozzle Seat
Technical Data:
Part No. Description Qty
Drive: T-Handle
KL-0186-511 Cleaning Tool for Injector Nozzle Seat 1
Length: 238mm
KL-0186-501 Extension 1
Cleaning tool Ø: 7.5/17mm
Copyright GEDORE Automotive GmbH, Germany (271) 6.4-26
formerly