Page 66 - ZKTime.net3_.0-Software-User-Manual-V1.0

• Add device Manually

1. Click [Add] button to enter to
the Add Device interface.

Set the parameters as required. The parameter with *, means cannot be empty.

Terminal Type: Click button, and then select terminal type (Linux or MT100) in the drop-down list.

Status: Select as Disable or Enable as required.

When select the Status as Enable, enable this device, you can upload employee and work code to the device,
or download employee and attendance records from the device as required, etc.

» Connection Info

Connection Mode: You can select as TCP/IP or USB as required.

Name: Enter the name for identifying device.

SN: Generate automatically after connecting the device successfully.

IP Address, Port, Password: Enter them according to the actual condition.

Record Setting: Select as required.

• Reset: If select this option ( indicates selected), the data on the device shall prevail and overwrite the
corresponding data in the software when the device synchronizes data to the software after their first
connection. (How to sync data, please refer to “7.3 Data Sync”.)

• Merge: If select this option ( indicates selected), the data will be merged according to the user-selected
data synchronization mode when the device synchronizes data to the software after their first connection.
(How to sync data, please refer to “7.3 Data Sync”.)

ZKTime.Net 3.0 59