Page 70 - ZKTime.net3_.0-Software-User-Manual-V1.0

Alarm Delay [s]: Detection to the abnormal door sensor state, the door
sensor will generate an alarm signal after a period of time. This time is
door sensor alarm delay. (Functioning value is 1~99s)

NC TZ: Normal close time zone.

NO TZ: Normal open time zone.

Retry Time: When the failed press times reach the set times, alarm
signal will emit. (Functioning value is 1~9 times.)

Anti-Pass Mode: Click button and select the anti-pass mode as
None, Out, In, or Out/In as required. 3. After setting, click [Set Option]

button to save and modify the
Master State: Click button and select the master state as None,
Control Out, or Control In as required. door option.

• Wiegand Option
• Note: You must connect to
the terminal successfully
before doing the Wiegand
Option setting.

1. Tick ( ) and select device
in the Device list, and click
Wiegand Option tag to
enter to the Wiegand
Option setting interface.

2. Click [Read Option] button to
read the Wiegand setting in the
selected device.
Wiegand Format: The system has two built-in formats, Wiegand 26-bits
and Wiegand 34-bits.

ID Type: Select the ID Type as ID or Pin (Emp ID) as required.

Failed ID: Defines the output value for user authentication failures. The
output format is determined by the setting of Wiegand format. The
value ranges from 0 to 65535. 3. After setting, click [Set Option]
button to save and modify the
Site Code: Similar to device ID. But the code is specified by user. Wiegand option settings.
Different device can be repeated. (With range of 0~255)

ZKTime.Net 3.0 63