Page 1013 - 2006 HARLEY FLSTCI SERVICE MANUAL
P. 1013

2
                                                                               3          1
                                                    Figure 7-6. Retaining Ring Orientation  4    Pivot screw @ 84-108 in-lbs (9.5-12.2 Nm)  Figure 7-7. Detent Arm Assembly

                                   2








                                        1


                                              Opening  Tab                                   Spring sleeve  Spring  Follower



               7922                           1.  2.         7412                            1.  2.  3.  4.



                           Wear




              CLEANING AND INSPECTION



                     1WARNING 1WARNING Compressed air can pierce the skin and flying debris from compressed air could cause serious eye injury.  safety glasses when working with compressed air. Never use your hand to check for air leaks or to determine air See Figure 7-5. Clean all parts except bearings (2) with solvent. Blow parts dry with low pressure compressed Inspect bearings (2) and shifter cam ends. If ends of shifter cam are pitted or grooved, replace the shifter cam and bearings. Install new bearings in support blocks by pressing on the side of the bearing with letters stamped on it. Stamped side of bearing should face outward when support block is install












                 HOME             flow rates. (00061a)  1.  air.  2.  3.  necessary.  4.  aged.  serious eye injury. (00312a)  1.  b.   c.   over shifter cam (4).  7-8
   1008   1009   1010   1011   1012   1013   1014   1015   1016   1017   1018