Page 1018 - 2006 HARLEY FLSTCI SERVICE MANUAL

7-13
7
Opening for ring

1
Slot 2006 Softail: Transmission
6
2
Tab Figure 7-17. Release Mechanism Assembly Figure 7-18. Retaining Ring Installation

5
4
3
Inner ramp Balls (3) Outer ramp Ramp coupling Cover Retaining ring Gasket

d0347x7x 1. 2. 3. 4. 5. 6. 7. d0391x7x

CLEANING AND INSPECTION

components in cleaning solvent. See Figure 7-17. Wash the ball and ramp mechanism Inspect the three balls (2) and ball socket surfaces on ramps (1, 3) for wear, pitting, surface breakdown and other damage. Replace damaged parts. Check fit of the ramp coupling (4) on inner ramp (1). Replace both parts if there is excessive wear. Check clutch cable end for frayed or worn ends. Replace cable if damaged or worn. Check the bore in the cover (5) where the ramps (1, 3) are retained. There should be no wear. Lips worn into the bore can catch the ramps and cock them, causing improper clutch adjustment. ASSEMBLY/INSTALLATION See Figure 7-15. Screw clu

HOME 1. 2. 3. 4. 5. 1. 2. 3. 4. 5. (9.5-12.2 Nm). 6. 7. 8.