Page 1022 - 2006 HARLEY FLSTCI SERVICE MANUAL

7-17

5

4

3 2006 Softail: Transmission
3 Figure 7-23. Installing Bearing Race

1
Bearing inner race Sleeve pilot

2

1 Sleeve Washer Nut
2536 2901 1. 2. 3. 4. 5.

shaft hole. Secure with new retaining ring (1) if disas-
7.5
Measure the length of the bearing inner race (1). The race
Tighten nut (5) while holding sleeve pilot (2) station-
Press race (1) onto shaft so inside edge is 0.100-
See Figure 7-20. Install push rod assembly (2-5) in main-
ary with wrench on flats at end of screw threads.
the bearing inner race, use those parts of the combina-
tion bearing race, PULLER AND INSTALLATION TOOL
bearing outer race in the primary chaincase. To install
See Figure 7-23. The bearing race must be positioned on
the shaft a precise distance to properly align with the
Position sleeve (3) over sleeve pilot (2) and against
Place washer (4) over threaded portion of sleeve
Thread sleeve pilot (2) onto end of mainshaft (left
Slide bearing inner race (1), chamfer edge first, onto
0.150 in. (2.540-3.810 mm) from main drive gear.
gasket. See These actions may 4.9 EXHAUST SYSTEM: 4.11 EXHAUST SYSTEM:
new Install the shifter forks, shifter cam and top cover. See Install transmission sprocket nut. See 6.5 TRANSMIS- Install primary chaincase, clutch assembly and primary cover. See PRIMARY CHAINCASE HOUSING under 6.2 CAUTION Do not overtighten drain plug. When draining or adding lubricant, do not allow dirt, debris or other contaminants Clean and install transmission drain plug. Tighten to 14- Fill transmission to proper level with fresh transmission FXST/FLST/FLSTC/FXSTB/FXSTS, 4.10 EXHAUST FLSTN or 4.12 EXHAUST SYSTEM: FLSTSC as appro-
NOTE
(Part No. HD-34902-B). mainshaft. hand thread). bearing race (1). pilot (2) and install nut (5). must be 0.9950-1.000 in. (25.27-25.40 mm) long. Install the side cover, using a TRANSMISSION CLUTCH RELEASE COVER 7.4 SHIFTER FORKS. SION SPROCKET. PRIMARY CHAINCASE. to enter transmission drain case. result in damage to the motorcycle. 21 ft-lbs (19.0-28.5 Nm). fluid. See 1.13 TRANSMISSION LUBRICANT. Install exhaust system. See SYSTEM: FXSTD/FLSTF,

HOME 3. a. b. c. d. e. 4. sembled. 5. 6. 7. 8. 9. 10. 11. priate.