Page 1056 - 2006 HARLEY FLSTCI SERVICE MANUAL
P. 1056

8.10                                                       7                                          8                                           8-17

                                                                                                5
                                                                                                                             9


                                                                         6                                                                                       2006 Softail: Electrical


                                 1                                                      4
                                                         Rear cylinder coil tower Front cylinder coil tower  4  3  5        1      Coil (carbureted)  Screw with washer Coil cover (carbureted)  Coil cover (EFI)  Coil cover (FXSTDI) Front cylinder spark plug cable Rear cylinder spark plug cable  Coil cover (FXSTD)
                                                  2            Figure 8-16. Coil Towers          11                10                                       Figure 8-17. Coil









                        7575                             1.  2.        s0512x8x       2                                         Coil (EFI)  1.  2.  Screw  3.  Pad (2)  4.  5.  6.  7.  8.  9.  10.  11.



                                                      Coil removal/installation on FLSTSC models requires swivel
                                                               Remove screw and washer (5) to Remove two mounting screws (3) to detach coil from  See  Figure 8-17.  Attach connector [83] to backside of Position coil on seat post. Install two screws (3) and Fasten cover (6, 7, 8, or 11) to coil with screw and See Figure 8-16. Attach plug wires to coil towers. Rear
                                                        sockets and ball ended hex wrenches. Rear exhaust pipe
                                     cause death or serious injury, disconnect negative (-)
                                   prevent accidental vehicle start-up, which could
                                               See Figure 8-16. Remove plug wires from coil towers.





                               1WARNING
                               1WARNING
                                                   NOTE
               IGNITION COIL           battery cable before proceeding. (00048a) Disconnect negative battery cable.  removal is not necessary.  Figure 8-17.  detach cover (6, 7, 8, or 11) from coil (1, 2).  Detach connector [83] from backside of coil.  INSTALLATION  tighten to 120-180 in-lbs (13.6-20.3 Nm).  washer (5). cylinder plug wire attaches to upper coil tower.  Connect negative battery cable.











          HOME         REMOVAL     To      1.  2.              See   3.  4.  seat post.  5.  1.  coil.  2.  3.  4.  5.
   1051   1052   1053   1054   1055   1056   1057   1058   1059   1060   1061