Page 1224 - 2006 HARLEY FLSTCI SERVICE MANUAL

3-13

Figure 3-14. Neway Valve Seat Cutter Set 2006 FLSTFSE 2 : Engine

d0682x3x

ing brush is supplied with the Neway tool set. tion tool supplied in the tool set. drop the cutter onto the seat. uniform finish and remove pitting). every 90° will help in determining where new angles are. needs to be made next. closer to the port.

NOTES Always ensure cutter blades and cutter pilot are clean before beginning the cutting process. The correct clean- Always ensure the inside of the valve guide is clean by using Kent-Moore cleaning brush (Part No HD-34751). See Figure 3-14. Obtain the NEWAY VALVE SEAT CUT- TER SET (Part no. HD-35758-B). Choose the cutter pilot that fits properly into the valve guide hole. Securely seat the pilot by pushing down and turning using the installa- Choose the proper 46° cutter (intake or exhaust) and gently slide the cutter onto the pilot. Be careful not to While applying a constant and consistent pressure, remove just enough material to show a complete cl

HOME ● ● 7. 8. 9. to improper installation. 10. a. b. ● ● valve seat.