Page 746 - 2006 HARLEY FLSTCI SERVICE MANUAL

2-97

2 2006 Softail: Chassis

Back of transmission
1 Spacer collar against transmission Figure 2-117. Spacer Collars (Electrical Panel Removed For Illustration)

2

8493 1. 2.

with spacer collars facing transmission case. See
THREADLOCKER 262 (red) to threads of pivot shaft nut. Install and tighten pivot shaft nut to 90-110 ft-lbs (122-149.1 Nm). NOTE Proper pivot shaft tightening is important to maintain rear fork Check for freedom of rotation of the rear fork around the bearings and that the fork and frame side members have not been distorted when the pivot shaft nut was tight- See Figure 2-116. Install the canister (California mod- els), fender extension (2), brake caliper and rear wheel. Install both rear shock absorbers (9) using bolts and washers (8). See 2.27 REAR SHOCK ABSORBERS.
the bores in the frame align with the bores in the fork.
See Figure 2-116. Place rear fork (3) in the frame so that
From the right side, install pivot shaft and spacers
Insert the bushings (10) into the spherical bearings (7)
Apply LOCTITE ANTI-SEIZE to pivot shaft (4).

INSTALLATION from the inside. Install pivot shaft. Figure 2-117. Apply LOCTITE

HOME 1. 2. a. b. c. alignment. 3. ened. 4. 5.