Page 745 - 2006 HARLEY FLSTCI SERVICE MANUAL

Remove pivot shaft (4) and two spacers (11). Remove
the two bushings (10) inside the spherical bearings (7).
The spherical bearings are lifetime lubricated and will require
2.26 The sleeve type Bolt and washer (2)
The rear fork can now be removed from the frame.
CLEANING AND INSPECTION

no further attention other than cleaning. spherical bearings, if not damaged, will last the life of the motorcycle. Clean the bearing bore with a clean shop towel, removing any dirt or grit adhering to the bearing surface. Rough check the rear fork for correct alignment. A bent rear 8. Rear shock (2) 9. Bushing (2) 10. Spacer (2) 11. Washer 12. Pivot shaft nut 13. 13 6 11 10 11 10

6. fork must be replaced. Rear inner fender Retaining ring (2) 12 7
Bolt (2) 1. 2. Rear fork 3. Pivot shaft 4. Washer 5. 6. Bearing (2) 7. Figure 2-116. Rear Fork
2.22 REAR BRAKE CALIPER: See Figure 2-116. Remove two bolts (1) from rear inner fender (2). Lift upper right corner of fender towards rear Remove the rear shock absorber bolts and washers (8) On California models, detach evaporative canister from 2 6 8 9
Remove the belt guard. Remove rear brake caliper and

REAR FORK REMOVAL Remove the rear wheel. See 2.8 REAR WHEEL. mounting bracket. See FXST/FXSTB/FXSTS. tire and lift upward. only. See 2.27 REAR SHOCK ABSORBERS. transmission. 3 7 5 4 2006 Softail: Chassis

HOME 1. 2. 3. 4. 5. s0311x2x 1 2-96