Page 743 - 2006 HARLEY FLSTCI SERVICE MANUAL

Figure 2-115. Remove Upper and Lower Steering Head Bearing Races

Driver 3

1 4

Remover Collet 2

s0384x2x

Steering Head Bearing Race Removal
SPECIALTY TOOL Universal driver handle Steering head bearing race remover See Figure 2-115. With the tapered side down, seat the two-piece remover tool on the upper bearing race leaving Insert the driver at the bottom of the steering head tube, and while holding the remover tool on the race, center the collet in the gap. Tap the driver to remove the upper Reverse the tool and repeat the procedure to remove the SPECIALTY TOOL Steering head bearing race installer Lubricate outside of the bearing races with engine oil. Install the new races using STEERING HEAD BEARING 11WARNING 1WARNING Use care not to damage the new races’ tapered surface. T

PART NO. HD-39301-A a gap in the middle. Install the collet on the driver. race. lower bearing race. ASSEMBLY PART NO. RACE INSTALLER (Part No. HD-39302). in death or serious injury. new Pack the Purpose Grease. cage and the bearing. only the inner race of the new bearing. 2006 Softail: Chassis

HOME HD-33416 1. 2. 3. 4. HD-39302 1. 2. 3. 4. 2-94